---
html_class: wide-page
---

# Antenna Demo

Watch an antenna radiate. Pick the **Dipole**, **Monopole**, **Dish**, or **Phased Array** tab at the top, then change the frequency and the antenna size to see how the radiated wave, the gain pattern, and the power the antenna accepts respond.

<div class="demo-frame">
  <div class="demo-frame__bar">
    <span>Interactive demo · Antennas · Lesson 32</span>
    <a href="https://usafa-ece.org/apps/antenna-demo/" target="_blank" rel="noopener">Open full-screen ↗</a>
  </div>
  <iframe
    src="https://usafa-ece.org/apps/antenna-demo/"
    height="960"
    loading="lazy"
    title="Antenna Demo"></iframe>
</div>

## Things to Try

- **Find the resonant length.** On the Dipole tab, step through the length buttons from $\lambda/10$ to $2\lambda$. Which length accepts nearly all of the transmitter's power, and why do the others lose power?
- **Change the frequency.** Raise the frequency and check the $\lambda = c/f$ readout. How long must a half-wave dipole be now?
- **Compare gain patterns.** Use the Gain Pattern tab to compare the $\lambda/2$ dipole (maximum gain 1.64) with longer dipoles. Where does the peak point, and what happens to the gain toward the horizon?
- **Go from dipole to monopole.** Switch to the Monopole tab and compare its length and pattern with the half-wave dipole.
- **Focus the beam.** On the Dish tab, increase the dish radius $r$ or the frequency and watch the half-power beamwidth shrink and the gain rise, as $G = (2\pi r)^2 \eta / \lambda^2$ predicts. The formula takes the radius, not the diameter.
- **Steer without moving.** On the Phased Array tab, change the steering angle $\theta_0$ and watch the beam swing away from boresight. The readouts show the phase shift $\beta$ and time delay $\Delta t$ between neighboring elements that produce that angle.
