Comms Architecture Animation

Contents

Comms Architecture Animation#

A notional, looping animation of the Project 5 strike package seen as a communication network. Satellites pass overhead, and data moves over X-band, Ka-band, S-band, and laser links while the IADS uses fiber and RF on the ground. Partway through each 60-second loop, an S-band jammer attacks the CubeSat link to the F-47s.

Animation · Comms Architecture · Lesson 33 Open full-screen ↗

What to Watch#

  • Every link is a Friis problem. Each line between two platforms is a transmitter, a path, and a receiver. The power that arrives depends on the transmit power, both antenna gains, the wavelength, and the distance.

  • Frequency choices. The links use different bands: X-band (9 GHz) from MILCOM to the B-21s, Ka-band (20 GHz) from the Loyal Wingmen to the F-47s, S-band (3.00 GHz) from the CubeSat to the F-47s, and a laser crosslink from MILCOM to the CubeSat. For fixed antenna gains, a higher frequency means a shorter wavelength and more path loss.

  • Distance. The GEO MILCOM satellite is 35,786 km up, while the CubeSat is at 200 km. Friis says received power falls with the square of the distance.

  • Jamming is noise. When the S-band jammer comes on, its signal competes with the link signal at the receiver. The SNR drops, the link-quality bar falls, and the link shows JAMMED.

  • The numbers you need. The panel lists the jammer, F-47, and CubeSat transmit power, frequency, gain, and range: the inputs to a Friis and SNR calculation for this link.

The same animation also appears with the IADS material in Lesson 37.