RWR Simulator#
You are running the test station for a RADAR warning receiver. Command a threat RADAR to a known angle, then compare the bearing the receiver measures with the true one. The scope on the left shows the measured bearing in red and the true angle as a muted reference marker.
Things to Try#
Weaken the signal. Step the signal strength from 0 dB down to −40 dB and watch the bearing history. How far does the measured bearing wander from the true angle?
Change the threat frequency. Step from VHF up to X band. The \(d/\lambda\) readout changes because the antenna spacing \(d\) is fixed while the wavelength \(\lambda\) shrinks. Does the bearing stay accurate at every frequency?
Move off boresight. Command angles out toward ±60° and compare the error with what you saw at 0°.
Collect data. Press Record Test Point (or the space bar) at each setting, then use Export CSV to save your measurements.