Antenna Demo

Contents

Antenna Demo#

Watch an antenna radiate. Pick the Dipole, Monopole, Dish, or Phased Array tab at the top, then change the frequency and the antenna size to see how the radiated wave, the gain pattern, and the power the antenna accepts respond.

Interactive demo · Antennas · Lesson 32 Open full-screen ↗

Things to Try#

  • Find the resonant length. On the Dipole tab, step through the length buttons from \(\lambda/10\) to \(2\lambda\). Which length accepts nearly all of the transmitter’s power, and why do the others lose power?

  • Change the frequency. Raise the frequency and check the \(\lambda = c/f\) readout. How long must a half-wave dipole be now?

  • Compare gain patterns. Use the Gain Pattern tab to compare the \(\lambda/2\) dipole (maximum gain 1.64) with longer dipoles. Where does the peak point, and what happens to the gain toward the horizon?

  • Go from dipole to monopole. Switch to the Monopole tab and compare its length and pattern with the half-wave dipole.

  • Focus the beam. On the Dish tab, increase the dish radius \(r\) or the frequency and watch the half-power beamwidth shrink and the gain rise, as \(G = (2\pi r)^2 \eta / \lambda^2\) predicts. The formula takes the radius, not the diameter.

  • Steer without moving. On the Phased Array tab, change the steering angle \(\theta_0\) and watch the beam swing away from boresight. The readouts show the phase shift \(\beta\) and time delay \(\Delta t\) between neighboring elements that produce that angle.